Technicial Specifications
| Maximum Rating | 3575 kVA |
| Minimum Rating | 2363 kVA |
| Emissions/Fuel Strategy | Low Fuel Consumption |
| Frequency | 50 Hz |
| Speed | 750 & 1000 rpm |
| Duty Cycle | Standby, Prime, Continuous |
| Engine Model | 3608 I-8,4-Stroke Water-Cooled Diesel |
| Bore | 280 mm |
| Stroke | 300 mm |
| Displacement | 148 l |
| Compression Ratio | 13:01 |
| Aspiration | TA |
| Fuel System | Direct unit injection |
| Governor Type | Generator Set Monitoring System (GMS) |
| Length - Maximum | 10261.7 mm |
| Width - Maximum | 2530.3 mm |
| Height - Maximum | 3977.7 mm |
| Dry Weight - Genset (maximum) | 41390 kg |
Advantages and Features
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
Generator
- Matched to the performance and output characteristics of Cat engines
- Industry leading mechanical and electrical design
- Industry leading motor starting capabilities
- High Efficiency
Worldwide Product Support
- Cat dealers provide extensive post-sale support including maintenance and repair agreements.
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S��?�O��?�S��?��?��? program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products
Full Range of Attachments
- Wide range of bolt-on system expansion attachments, factory designed and tested Flexible packaging options for easy and cost effective installation
Standard Equipment
-
Air Inlet System <!-- 3600 series only -->
- Breather, crankcase, top-mounted
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
- Air inlet shutoff
-
Cooling System
- Water temperature regulator
- Jacket water thermostats
- Engine coolant water drains
-
Exhaust System
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
- Dry, gas tight, exhaust manifold
-
Fuel System
- Simplex or duplex
-
Generator System
- Custom generator per generator data sheet completed by dealer
-
Governor System
- UG Actuator
-
Lube System
- Service side engine mounted on cylinder block inspection covers
- Centrifugal oil filters with single shutoff
- Crankcase explosion relief valves
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Oil filler and dipstick
- Oil pressure regulating valve
-
Mounting System
- Engine and generator mounting
- Damper, torsional vibration
-
Starting / Charging System
- Line group for single point custom connection
- Air silencer
- One motor, engine mounted at rear, on left side
- Vane type air starter
-
General:
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
Optional Equipment
-
Air Inlet System
- Air cleaner louver assembly
- Air inlet adapter
- Heavy duty air cleaner
- Vertical support bracket
- Soot filter
- Boost control valve
-
Cooling System
- Expansion tank
- Auxiliary water pump
- Heating aids
- Cooling system aids
-
Exhaust System
- Flexible exhaust fittings
- Weld flange and related hardware
-
Fuel System
- Duplex primary fuel strainer
- Fuel priming pump
- Fuel system connections
-
Generator System
- Winding temperature detectors
- Anti-condensation space heaters
- Busbar connections
- 3 Phase, six Leads, WYE
- Class F insulation
-
Governor System
- Digital programmers
- 2301 A load share
- 723 Plus
- EGB actuator
- Electronic/actuators
- Battery backup/power supply
-
Lube System
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
-
Mounting System
- Spring type vibration isolators
- Non-vertically restrained
- Vertically restrained
- Isolator
-
Starting / Charging System
- Pressure reducing valve
- Compressed air flex hose
-
General:
- Custom paint colors
