Technicial Specifications
| Power Range | 280 bhp - 425 bhp (209 bkW - 317 bkW) |
| Speed Range | 2300 - 2700 rpm |
| Emissions | U.S. EPA Tier 3, IMO II, RCD II, China II |
| Configuration | In-line 6, 4-stroke-cycle diesel |
| Displacement | 7.01 l |
| Aspiration | Turbocharged-aftercooled |
| Governor | Electronic (A5E2 V2 ECM) |
| Flywheel Housing | SAE No. 03 |
| Bore | 105 mm |
| Stroke | 135 mm |
| Refill Capacity | 20 L (5.3 gal) |
| Oil Change Interval | 500 hrs |
| Rotation | Counterclockwise from the flywheel end |
| Cooling | Heat exchange or keel cooled |
| Dry Weight | 760 kg |
| Height | 876 mm |
| Length | 1095 mm |
| Width | 798 mm |
Advantages and Features
Key Features & Benefits
- Common rail fuel system enables optimum combustion and low emissions
- Reduced combustion noise through advanced electronic control
- 12V or 24V electrical system
- Compatible with Cat® displays and electronics
- Closed crankcase ventilation system improves engine room cleanliness
- Gear-driven jacket water pump and sea water pump for superior reliability
- Maintenance free valve train with hydraulic valve lash adjusters
- Self-priming fuel system ensures a smooth start every time
Standard Equipment
-
STANDARD EQUIPMENT
- Water-cooled turbocharger and exhaust manifold
- Common rail fuel system
- Corrosion-resistant sea water aftercooler
- Closed crankcase ventilation system
- Starter motors - 12V or 24V
- Fuel cooler
- Integral engine oil cooler
- Vibration damper and guard
- Electric fuel priming pump
- Self-tensioning multi-vee alternator drive belt
- Gear-driven seawater pump (rubber impeller)
- Fin and tube-type jacket water heat exchanger
- Front and rear engine mounting brackets
Optional Equipment
-
OPTIONAL ATTACHMENTS
- Marine Classification Society (MCS) Approval ABS, BV, CCS, CRS, *DNV-GL, IRS, LR, Class NK, PRS, RINA (*DNV-GL approval available for keel-cooled engines only)
- SOLAS double wall high-pressure fuel lines
- Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
- Engine-mounted secondary alternator - 24V 55 amp or 12V 100 amp
- Analogue gauge displays
- Transmission gear oil cooler (engine mounted)
- Glow plugs
- Jacket water heater
- Various 5" and 6" water cooled exhaust elbow configurations
- Cabin heater (calorifier) connections
- Right-hand and high-level left-hand oil dipsticks
- Mechanical throttle converter for repower
