D2

D2

The new Cat® D2 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Engine Model Cat® C3.6
Power - Net 68.8 kW
Operating Weight 8338 kg

Technicial Specifications

Engine
Engine Model Cat® C3.6
Power - Net 68.8 kW
Displacement 3.6 l
Net Power - 2,200 rpm - SAE J1349 68.8 kW
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 68.8 kW
Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2) Engine equivalent to Tier 3 emission standards.
Weights
Operating Weight 8338 kg
Operating Weight - LGP 8648 kg
Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Note (2) For machine with ripper, add 554 kg (1,222 lb).
Transmission
Drive Pumps 1
Maximum Travel Speed - Reverse 10 km/h
Relief Valve Settings 48500 kPa
Maximum Travel Speed - Forward 9 km/h
Track Motors 2
Hydraulic Controls
Pump Output 65 l/min
Relief Valve Settings 20600 kPa
Winch
Weight 610 kg
Winch Drive Hydrostatic
Control Hydraulic
Speed Variable
Maximum Line Pull - Full Drum 11340 kg
Drum Width 274 mm
Maximum Line Speed - Full Drum 63 m/min
Rope Diameter - Recommended 16 mm
Drum Capacity - Recommended Cable 113 m
Overall Width 741 mm
Winch Length 705 mm
Rope Diameter - Optional 19 mm
Drum Diameter 254 mm
Maximum Line Speed - Bare Drum 40 m/min
Drum Capacity - Optional Cable 78 m
Throat Clearance 171.5 mm
Maximum Line Pull - Bare Drum 18144 kg
Ripper
Type Parallelogram
Number of Shanks 3
Height 165 mm
Weight 554 kg
Maximum Reach - Ground Line 766 mm
Maximum Ground Clearance Under Tip 448 mm
Overall Width 1710 mm
Maximum Digging Depth 337.5 mm
Engine 
Power Train  Hydrostatic
Cab
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Undercarriage
Number of Rollers - Each Side 7
Shoe Width - LGP 635 mm
Shoe Width - Standard 460 mm
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43
Track Gauge - LGP 1725 mm
Track Gauge 1550 mm
Ground Pressure - LGP 29.7 kPa
Length - Track on Ground - LGP 2248 mm
Undercarriage 
Ground Pressure  39.5 kPa
Number of Shoes - Each Side - Abrasion Undercarriage  38
Length of Track on Ground  2248 mm
Service Refill Capacities
Final Drive - Each - LGP 10 l
Transmission - Hydraulic Tank 90 l
Crankcase - With Filter 10.5 l
Cooling System 19 l
Fuel Tank 195 l
Service Refill Capacities 
Final Drives - Each Side  10 l
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Dimensions
BLADE: Blade Capacity (SAE) - LGP 1.85 m³
Track Gauge - LGP 1725 mm
Overall Length - With Blade - LGP 4272 mm
BLADE: Blade Width at Maximum Angle - LGP 2874 mm
BLADE: Blade Height - LGP 910 mm
BLADE: Maximum Tilt - LGP 438 mm
BLADE: Blade Lift Height - LGP 708 mm
BLADE: Blade Width - LGP 3149 mm
BLADE: Maximum Angle (either side) - LGP 25°
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
BLADE: Digging Depth - LGP 589 mm
Ground Clearance - LGP 332 mm
Note Abrasion Undercarriage
Length of Basic Dozer (without blade) - Standard 3290 mm
Width of Dozer (standard shoes, no blade) - Standard 2010 mm
Width of Dozer (standard shoes, no blade) - LGP 2360 mm
Length of Basic Dozer (without blade) - LGP 3290 mm
Dimensions 
BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58°
Ground Clearance - Standard  332 mm
BLADE: Maximum Angle (either side) - Standard  25°
BLADE: Blade Height - Standard  1010 mm
BLADE: Maximum Tilt - Standard  387 mm
Overall Length - With Blade - Standard  4281 mm
BLADE: Digging Depth - Standard  593 mm
BLADE: Blade Width - Standard  2782 mm
BLADE: Blade Lift Height - Standard  743 mm
BLADE: Blade Width at Maximum Angle - Standard  2542 mm
BLADE: Blade Capacity (SAE) - Standard  1.98 m³
Track Gauge - Standard  1550 mm

Advantages and Features

IMPROVED VISIBILITY

  • New sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.

GRADE TECHNOLOGY

Cat small dozers include a suite of Operator Assist features that work seemlessly to save time, effort, fuel, machine wear and overall costs. Cat Grade with Assist is an optional technology available for small dozers.

        
  • Steer Assist automates track steering with light or heavy loads and automates blade tilt steering to help push heavy loads with less effort. This feature helps reduce operator inputs by up to 75% and enhances operator efficiency and productivity. Steer Assist is standard with Assist with Attachment Ready Option (ARO). Steer Assist 3D is standard with Grade 3D with Assist.
    •     
  • Stable Blade Lift and Tilt automatically works behind the scenes to allow operators to create smooth surfaces with less effort using accelerometers on the blade and chassis with an advanced algorithm to make minor blade raise and lower movements. Stable Blade Lift and Tilt is standard with Assist with ARO and Grade 3D with Assist.
    •     
  • Blade Load Monitor provides real-time feedback of current load vs. target load to fully utilize machine capacity benefiting operators of all skills levels. Automatically compensates for ground conditions. This feature is not available indoors or in areas where a GPS signal is not available. Blade Load Monitor is standard with Assist with ARO and Grade 3D with Assist.
    •     
  • Low Slip Traction Control prevents excessive track slip to improve machine efficiency and reduce burden on the operator. Feature offers two modes: Normal Mode helps when pushing heavy blade loads by limiting non-productive track slip, recommended for most applications. And Low Slip Mode limits track slip for applications sensitive to slip such as spreading material on top of a liner, select this mode when needed. Traction Control is standard with Assist with ARO and Grade 3D with Assist
    •     
  • AutoCarry™ raises and lowers the blade to maximize pushing capability and prevent excessive track slip when pushing heavy loads. Feature is designed to work in unison with other Operator Assist Features. Not available indoors or in areas where a GPS signal is not available. AutoCarry is standard with Assist with ARO and Grade 3D with Assist.
    •     
  • Scalable Grade 2D and 3D with Assist is an optional feature that makes your job up to 39% faster with up to 82% fewer operator inputs and less rework by maintaining blade angles for better surface quality – even with less experienced operators.

UP TO 10% IMPROVED FUEL ECONOMY

  • The D2 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacrifice when ECO mode is active.

COMFORTABLE WORK SPACE

  • The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.

BIGGER, BETTER DISPLAY WITH CAMERA

  • This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.

DURABLE UNDERCARRIAGE

        
  • The D2 is available with either a Heavy Duty (HD) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.

Standard Equipment

  • POWER TRAIN
    • Air cleaner with precleaner, automatic dust ejection and underhood intake
    • Aluminum bar plate cooling system (radiator, power train)
    • Automatic traction control
    • Cat C3.6 diesel engine
    • Drive, auxiliary
    • Dual path, closed loop, hydrostatic transmission
    • Electric fuel pump
    • Fuel/water separator
    • Turbocharged aftercooled
  • ELECTRICAL
    • Alarm, backup
    • Alternator, 150 amp, heavy duty
    • Batteries, heavy duty, maintenance free, 1,000 CCA
    • Diagnostic connector
    • Four integrated front halogen lights, two rear halogen
    • Horn, electric
    • Starter, electric, 12 V, heavy duty
  • UNDERCARRIAGE
    • Heavy Duty (HD) Undercarriage (43 section)
    • Carrier rollers
    • Guards, front/rear guiding
    • Seven roller track frame
    • Track adjusters, hydraulic
    • Track rollers, lifetime lubricated
  • HYDRAULIC
    • Hydraulic pump and oil
    • Single lever, three function control
    • Three valve hydraulics
  • CAT TECHNOLOGY
    • Stable Blade – Basic Lift
    • Third party 3D grade system compatible
    • Slope Indicate
    • Cat Product Link™ PLE643/PLE743 Cellular
  • ATTACHMENTS
    • Rigid drawbar
    • Front pull device
  • OPERATOR ENVIRONMENT
    • Armrests, adjustable
    • Coat hook
    • Controls, seat mounted, fore/aft adjustment
    • Cup holders
    • Eco mode
    • Electronic Monitoring system with gauge:
      – Chassis slope indication
      – Engine coolant temperature
      – Fuel level
      – Hydraulic oil temperature
    • Electronic security system
    • Engine air cleaner service indicator
    • Engine RPM and gear display
    • Floor mat, rubber, heavy duty
    • Foot pads, dash
    • Hour meter, electronic
    • Independent forward/reverse speed settings
    • Mirror, rearview, inside
    • Power port, 12 volt
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, hi-vis retractable 76 mm (3")
    • Seatbelt buckling indicator/reminder
    • Single pedal combining decel and brake functions
    • Speed recall
    • Storage compartment
    • Throttle switch, rotary
    • Travel speed limiter, electronic

Optional Equipment

  • POWER TRAIN
    • Air cleaner with external precleaner
    • Installation, winch
  • ELECTRICAL
    • Four integrated front LED lights, two rear LED
  • UNDERCARRIAGE
    • Abrasion undercarriage (38 section)
    • Track Pairs
      – Track, 460 mm (18 in)
      – Track, 635 mm (25 in)
  • HYDRAULIC
    • Four valve for use with ripper
    • Four valve for use with winch
  • CAT TECHNOLOGY
    • Assist with Attachment Ready Option (ARO) includes:
      – Slope Indicate
      – Blade Load Monitor
      – Stable Blade Lift and Tilt
      – Slope Assist
      – Traction Control
      – Steer Assist
      – AutoCarry
    • Grade 3D with Assist includes:
      – Same Assist with ARO features
      – Steer Assist 3D
      – Grade 3D
    • Cat Product Link PLE683/PLE783 Cellular/Satellite
    • Full-color 254 mm (10 in) touchscreen grade display
    • Cat Command Console and Cat Command Station (availability varies by region)
    • Cat Command Station (availability varies by region)
  • ATTACHMENTS
    • Drawbar, towing
    • Machine security system
    • Mounting, winch
    • Ripper, parallelogram, includes three shanks and teeth
    • Winch, hydraulic, high performance
    • Winch, hydraulic, retrieval
  • OPERATOR ENVIRONMENT
    • Cab, with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Radio, AM/FM Bluetooth®
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Sound suppression
  • OTHER
    • Heater, engine, coolant 120 V/240 V
    • Starting aid, ether