Technicial Specifications
Nominal Rated Payload | 363 t |
Rated Gross Machine Weight | 623690 kg |
Chassis Weight | 215217 kg |
Body Weight | 43000 kg |
Note (1) | Consult your tire manufacturer for maximum tire load |
Note (2) | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. |
Note (4) | Tier 4 Chassis Weight: 486263 lb (220565 kg) |
Gross Power - SAE J1995 | 2983 kW |
Engine Model | Cat® C175-20 |
Net Power - SAE J1349 | 2828 kW |
Rated Speed | 1750 r/min |
Emissions | U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. |
Bore | 175 mm |
Stroke | 220 mm |
Displacement | 106 l |
Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
Note (2) | U.S. EPA Tier 4 Final available for applicable markets. |
Note (3) | High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. |
Type | Twin, two-stage hydraulic cylinders with snubbing valve. |
Pump Flow - High Idle | 1140 l/min |
Relief Valve Setting - Raise | 24200 kPa |
Body Raise Time - High Idle | 25 s |
Body Lower Time - Float | 18 s |
Body Power Down- High Idle | 18 s |
Type | Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments |
Effective Cylinder Stroke - Front | 99.1 mm |
Effective Cylinder Stroke - Rear | 93.2 mm |
Rear axle - Oscillation | ±3.96 degrees |
Fuel Tank | 3785 l |
Fuel Tank (Tier 4) | 4542 l |
Diesel Exhaust Fluid Tank | 375 l |
Cooling System | 1160 l |
Crankcase | 390 l |
Front Wheels - Each | 61 l |
Differentials | 1250 l |
Steering Tank | 254 l |
Steering System - Including Tank | 360 l |
Brake/Hoist Tank | 770 l |
Brake Hoist System - Includes Tank | 1850 l |
Torque Converter Sump | 303 l |
Torque Converter/Transmission System - Including Sump | 629 l |
Note (1) | DEF Tank only available for EPA Tier 4 engine option. |
Front Axle - Empty | 47.20% |
Rear Axle - Empty | 52.80% |
Front Axle - Loaded | 33.30% |
Rear Axle - Loaded | 66.70% |
Note | Weight distributions optimized with Cat body. |
Type | Double reduction, planetary with full floating axles. |
Differential Ratio | 1.276:1 |
Planetary Ratio | 16.67:1 |
Total Reduction Ratio | 21.26:1 |
Note | Double reduction, planetary with full floating axles. |
Tires | 59/80 R63 |
Rims | 44" x 63" |
Note | Quick Change Rims optional. |
Note (1) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
Service Brakes | Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
Front Wet Disc Brake Surface Area | 132259 cm² |
Rear - Wet Disc Brake Surface Area | 198388 cm² |
Standards | Service and Secondary: ISO 3450:2011 |
Parking Brake | Four-corner, Multi-disc, Spring Applied, Hydraulically Released |
Load Brake | Rear service brakes |
Note | Anti-Lock Brake System (ABS) optional with CMD package |
Struck | 225 yd³ / 172 m³ |
Heaped (SAE 2:1)* | 330 yd³ / 252 m³ |
Note (1) | Consult your local Cat dealer for body recommendations. |
Air Conditioning | HFC - 134A refrigerant: 24,300 Btu/h |
Heater / Defroster | 38900 Btu/h |
Note | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. |
ROPS Standards (1) | The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. |
ROPS Standards (2) | ROPS (Rollover Protective Structure) meets ISO 3471:2008 criteria and ISO 13459:2012 |
FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II criteria and ISO 13459:2012 Level II |
Steering Angle | 40 ° |
Turning Diameter - Front | 37.4 m |
Steering Standards | ISO 5010:2019 |
Note | Turning Diameter (ISO 7457:2009) |
Forward - 1 | 10.7 km/h |
Forward - 2 | 14.4 km/h |
Forward - 3 | 19.3 km/h |
Forward - 4 | 26.1 km/h |
Forward - 5 | 35 km/h |
Forward - 6 | 47.3 km/h |
Forward - 7 | 63.6 km/h |
Reverse | 11.9 km/h |
Top Speed - Loaded | 63.6 km/h |
Rear Axle - Clearance - Loaded | 947 mm |
Inside Body Depth - Maximum | 3363 mm |
Overall Height - Body Raised | 15701 mm |
Loaded Ground Clearance | 786 mm |
Loading Height - Empty | 6998 mm |
Engine Guard Clearance - Loaded | 1025 mm |
Height - Top of ROPS - Empty | 6526 mm |
Front Canopy Height - Empty | 7709 mm |
Overall Body Length | 14802 mm |
Inside Body Length | 9976 mm |
Overall Length | 15080 mm |
Wheel Base | 7195 mm |
Rear Axle - Tail | 3944 mm |
Dump Clearance | 2017 mm |
Centerline Front Tire Width | 6534 mm |
Overall Canopy Width | 9116 mm |
Outside Body Width | 9755 mm |
Inside Body Width | 8513 mm |
Centerline of Rear Dual Tire Width | 6233 mm |
Overall Tire Width | 9529 mm |
Advantages and Features
SAFETY
- Wide walkways, ladders, catwalks and service platforms; slip-resistant surfaces and guard rails; wide secondary egress ladder and a rear service access ladder; and optional powered access ladder.
- Integral ROPS structure resiliently mounted to the main frame to reduce vibration and sound.
- Lockout/tagout box mounted on the front bumper that includes engine shutdown switch, battery lockout, starter lockout and transmission lockout.
- Standard Cat MineStar™ Detect Object Detection system, which combines radar and camera systems to warn operators about hazards within the immediate vicinity.
- Optional Driver Safety System alerts the operator if fatigue or distraction are detected.
PRODUCTIVITY
- Cost per ton advantage over competitive models in higher altitudes, ranging from 6% to as high as 14%, plus HP Body option reduces weight an additional 2.0-5.0 tonnes (2.2-5.5 tons).
- Optimal speed on steep grades, poor underfoot conditions and haul roads with high rolling resistance for faster cycle times when compared to competitive trucks; travels loaded at a top speed of 60 km/h (42 mph).
- Unequaled lugging force during acceleration thanks to 23% net torque rise.
- Constant power over a wide range of operating speeds thanks to Cat seven-speed planetary power shift transmission.
- Low-speed movement control and unsurpassed stall torque delivered by lock-up torque converter.
FUEL EFFICIENCY
- Multiple power settings that allow you to operate at full power or in economy mode, so you can decide how much power you need.
- Modes that fine-tune hydraulic and engine output to match the job at hand; Eco-mode shown to deliver fuel savings of up to 3.5% per cycle.
- Optimized fuel calibrations available for Tier 4, high altitude and lesser regulated applications.
- Engine ECM that does not inject fuel into the cylinders during retarding applications, for exceptional fuel economy — zero fuel burn during retarding.
- Increased fuel efficiency with Tier 4 configuration.
VERSATILITY
- Proven high production in the most challenging conditions—from extreme cold and soft underfoot conditions to high-altitude, deep copper applications.
- 20-cylinder, quad-turbocharged Cat C175 engine produces 2983 kW (4,000 hp) of power for fast acceleration; 2647-kW (3,550-hp) setting for applications that don’t require the highest power, such as the flat hauls found in many coal and iron ore applications.
- Excels at high altitudes, with 4x4 engine configuration that offers payload and greater speeds with no impact on fuel burn.
OPERATOR COMFORT & CONTROL
- Two options to equip 797F with the desired features for your operation.
- Ergonomic layout, excellent all-around visibility, and controls, levers and switches that are positioned for ease of use.
- Includes dozens of features designed to enhance comfort, such as reduced vibration and sound suppression.
- Next generation seat includes a height adjuster; adjustable shoulder stock to keep seatbelt from rubbing on the operator’s neck; and seat back, side and lumbar bolsters to increase stability.
- Four-corner oil-cooled brakes and Automatic Retarding Control to improve handling and machine control so operators can work quickly and confidently.
SERVICEABILITY
- Time-saving features such as long service intervals; grouped ground-level maintenance and checkpoints; oil level sight gauges and front wheel sight glass; and service platforms on the engine and transmission.
- Increased life for the majority of filters —in many cases doubling lives to 2,000 hours and extending replacement intervals to four months.
- Optional 100% airless electric start option that eliminates air system maintenance from the machine and improves uptime.
- Electronic Clutch Pressure Controls (ECPC) diagnostics
- Optional fast-fill service center and brake wear indicators.
DURABILITY AND LONG LIFE
- Only truck in its size class to achieve high-hour milestones of 130,000 or more hours.
- Greater than 5% tire life improvement, significant engine life increase, plus major drive train component life improvement.
- Over 80% of frame is cast, not fabricated steel plate.
- Box-section design, which incorporates two forgings and 14 castings in high-stress areas with deep penetrating and continuous wrap-around welds to resist damage from twisting loads without adding extra weight.
- Frame, powertrain, engine and components that are built to be rebuilt — delivering multiple lives of like-new performance at a fraction-of-new price.
CAT BODIES
- Bodies designed to be an integral part of the entire vehicle system, ensuring maximum chassis life.
- High Performance (HP) body features lightweight, simplified and durable design that provides complete front machine coverage and extended overhead protection.
- Oil sands body specifically designed for use in challenging Canadian Oil Sands applications.
- HP-XL body, a version of the standard HP body with an extended length floor, designed to neutralize extreme forward bias loading applications.
SUSTAINABILITY
- Designed to use less fuel, which reduces engine emissions, and there is zero fuel burn during retarding; optional Tier 4 Final engine reduces NOx and particulate matter.
- Less waste thanks to features like rear axle filtration, extended life filters and longer maintenance intervals.
- Cat Common Rail Fuel System, which provides optimal fuel delivery, reducing both fuel consumption and emissions output.
- Engine compatible with diesel fuel blended with lower-carbon intensity fuels such as biofuels and renewable fuels.
- Cat Rebuild and Cat Reman programs, which preserve raw materials, conserve energy and reduce emissions.
TECHNOLOGY SOLUTIONS
- Factory-ready for fully integrated Cat MineStar™ Command for hauling, an autonomous hauling solution proven to increase productivity up to 30%.
- Optional MineStar Fleet, a fleet monitoring system, to measure, manage and maximize the overall hauling operation.
- Standard MineStar Detect proximity detection system, which uses cameras to give operators a better view of what's happening around their equipment.
- Optional in-cab Cat Driver Safety System (DSS) intervenes when operator fatigue or distraction are detected.
Standard Equipment
-
ELECTRICAL
- Alarm, back-up
- Brushless, alternator, 150 ampere
- Batteries, 12V (2) 93 amp-hour
- Converter, 12V electrical
- Electrical system, 24V, 10, 20 and 25 amp
- Battery charge receptacle
-
Lighting system:
– Back-up and hazard lights
– Directional signals (front, rear LED)
– Front stair access/Service deck
– Stop/tail lights (LED)
– Engine compartment
– VIMS, blue light (LED)
– Headlights with lo-hi beam selector
-
OPERATOR ENVIRONMENT
-
Standard cab:
– Standard optimized operator seats
– Suspension trainer seat
– Flip down front visor
– Standard side of cab access
-
Deluxe cab:
– Heated and ventilated seats
– Suspension trainer seat
– Retractable front visor
– Rear of cab access and standard side of cab access
– Power windows
-
Deluxe cold weather cab:
– Heated and ventilated seats
– Suspension trainer seat
– Retractable front visor
– Rear of cab access and standard side of cab access
– Power windows
– Heated mirrors
-
All cab options include the following features:
- Air conditioner with automatic climate control
- 12V DC power supply (3)
- Coat hook
- Diagnostic connection port
- Dome courtesy light
- Entertainment radio ready 5 amp converter, speakers and wiring harness
- Gauges/Indicators:
– Gauge panel: Transmission fluid temperature; Brake oil temperature; Engine coolant temperature; Fuel level; Torque converter oil temperature
– Electric engine control fault indicator
– Electric hour meter
– Speedometer
– Tachometer
– Transmission gear indicator
– VIMS message center with advisor - Heater/defroster (11 070 kCal/43,930 Btu)
- Horn
- Cat Detect System
- Storage compartments
- Hoist, body control (electric)
- ROPS cab, insulated/sound suppressed
- Seat, operator, air suspension
- Seatbelt, operator, three-points, retractable
- Seat, trainer, air suspension
- Seatbelt, trainer, two-points, retractable
- Stairway and walkway access, 600 mm (23.6 in)
- Steering wheel, multi tilt, padded, telescopic
- Tinted glass
- Window, operator, electric powered
- Windshield wiper, intermittent control and washer
- Cup holder
- Mirrors, right and left
-
Standard cab:
-
POWER TRAIN
-
C175-20 emits equivalent to Tier 2 emission standards:
– Turbocharging (4)/Air-to-Air Aftercooler (ATAAC)
– Air cleaner with precleaner (4)
– Ground level engine shutdown
– Ether starting aid (automatic)
– Elevated low idle control
– Crankcase protection
– Multi-point oil pressure sensing
– Automatic starter protection
-
Braking system:
– Park brake integrated with gear selector
– Brake release motor (towing)
– Oil-cooled, multi-disc (front and rear) – service, retarding, parking, secondary
– Automatic Retarder Control, adjustable
– Engine overspeed protection
– Extended life brake disc material
-
Transmission:
– 7-speed, automatic powershift with electronic controls (ECPC)
– Body-up shift inhibitor
– Controlled throttle shifting
– Directional shift management
– Neutral coast inhibitor
– Neutral start switch
– Downshift/Reverse shift inhibitor
– Individual clutch modulation
– Body-up reverse neutralizer
– Programmable top speed
– Lock-up torque converter
- Pre-lubrication/engine
- Rear axle continuous lubrication/filtration
-
C175-20 emits equivalent to Tier 2 emission standards:
-
OTHER STANDARD EQUIPMENT
- Traction Control System
- Auto lubrication system
- Aux “buddy” dumping quick connect
- Aux steering quick connect (towing)
- Driveline guard
- Fast fill fuel system
- Fuel filter with water separator
- Ground level VIMS data port
- Ground level battery lockout
- Ground level transmission lockout
- Ground level engine start lockout
- Ground level engine shut-down
- High-speed crankcase oil change
-
Reservoirs (3 separate):
– Brake/Hoist, Steering/Fan, Transmission/Converter
- Rock ejectors
- Supplemental steering (automatic)
- Tie-down eyes
- Center hitch and tow points (front), tow pin (rear)
- Vandalism protection locks
-
Vital Information Management System (VIMS):
– Includes VIMS Payload Monitor with max payload and speed manager
- Hydraulic filters, 1,000 hour
- S•O•S℠ sample ports
- Service points, ground level
- Sight level gauges for hydraulic/engine oil
-
ANTIFREEZE
- Extended Life Coolant to –35° C (–30° F)
Optional Equipment
-
OPTIONAL EQUIPMENT
- Cat Detect System
- Cabin air precleaner
- Throttle lock
- Engine delay shutdown timer
- Antifreeze/coolant protects to –50° C (–58° F)
- Fuel tank (7570 L/2,000 gal)
- SL-V grease injectors
- Body heat
- Rear axle lubrication cooler
- External digital payload display
- Oil renewal system
- Oil renewal system with 3 day tank
- Engine coolant and oil heater for cold weather starts
- Road Analysis Control (RAC)
- Portable fire extinguisher
- Torque converter guard
- Brake wear indicator gauge
- Rims (wedge)
- Rim guard