Technicial Specifications
| Net Power - ISO 9249/SAE J1349 | 128 kW |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler, and alternator. Power as declared per ISO 14396. |
| Stroke | 127 mm |
| Engine Model | Cat® C4.4 |
| Maximum Torque | 738 N·m |
| Bore | 105 mm |
| Torque Rise - ISO 9294 | 21% |
| Emissions | Meets India CEV Stage V emission standards |
| Derating Altitude | 3000 m |
| Displacement | 4.4 l |
| Operating Weight - Typically Equipped | 14254 kg |
| Blade Width | 3.7 m |
| Arc Radius | 413 mm |
| Cutting Edge Width | 152 mm |
| Throat Clearance | 112 mm |
| Blade Height | 580 mm |
| End Bit - Width | 6 mm |
| Width | 2402 mm |
| Maximum Height | 3787.8 mm |
| Length of Machine* | 9941 mm |
| Note | *Typically equipped with push block and ripper. |
| Moldboard Sideshift - Left | 512 mm |
| Circle Centershift - Right | 656 mm |
| Moldboard Sideshift - Right | 663 mm |
| Maximum Lift Above Ground | 410 mm |
| Circle Centershift - Left | 656 mm |
| Blade Tip Range - Backward | 5° |
| Maximum Depth of Cut | 775 mm |
| Blade Tip Range - Forward | 40° |
| Circle Drive without Slip Clutch | 1.5 l |
| Hydraulic System | 55 l |
| Circle Drive with Slip Clutch | 7 l |
| Cooling System | 39 l |
| Transmission | 17 l |
| Engine Crankcase | 7.6 l |
| Fuel Tank | 269 l |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
Advantages and Features
Productive and Economical
- Increase your fuel economy up to 5% with the standard ECO mode.
- The on-demand fan reduces fuel consumption and under-hood heat for longer component life.
- Improve productivity with the Electronic Throttle Control which matches engine power and torque to application requirements.
- The powershift transmission and machine balanced design ensures that you get full drawbar power to the ground with the Cat C4.4 engine.
- The hydraulic system makes the machines more precise and predictable for a consistent grade.
- The Digital Blade Slope Meter option shows you the grade without relying on manual grade checkers.
- Product Link™ provides location, machine hours, fuel usage, productivity, idle time, diagnostic codes, and other machine data ondemand through the VisionLink® online interface, which helps you improve jobsite efficiency with lower operating costs.
Cab Keeps You Comfortable All Day Long
- Choose your comfort level in the cab with standard, mechanical suspension or air suspension seat.
- Easily adjust the control console and steering wheel.
- The high capacity Heating, Ventilation and Air Conditioning (HVAC) system option circulates fresh air, prevents dust entry, and keeps windows from fogging.
- Easily add a radio to the cab using the built-in mounting location option.
Reliable Performance
- The drawbar circle moldboard stays factory tight providing precision grading pass after pass.
- The machine structure is built for a long life. It’s designed to use several types of work tools, such as a front blade.
- A slip clutch option protects the circle drive if the machine strikes an immovable object.
- The front axle maximizes bearing life while also minimizing maintenance.
- Reduce daily greasing requirements and costly repairs to your circle and pinion with the Circle Saver option.
Safely Home Every Day
- See what’s behind you with the rear camera option. The dedicated display can be always on to ensure a safe workenvironment.
- In the event of an engine stall, count on the secondary steering system option to help stop the machine safely.
- Use three points of contact when entering and exiting the machine with strategically placed walkways and grab rails.
- Ground level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine.
- See the rear of your machine with side and rearview mirrors.
- Work past sundown using the strategically placed lights for nighttime visibility.
Maintenance Made Easy
- Filters, such as fuel, engine air, and oil filters, are grouped together for easy access and preventative maintenance.
- The standard drawbar circle moldboard increases durability using hardened circle teeth and replaceable wear inserts to help sustain factory tightness.
- Brake adjustments are maintenance free and easily accessible.
- The standard bottom guard shields the transmission and filter. Optional guarding protects your machine from damage in demanding applications.
- Spend less time cleaning the cooling system with the reversing fan option, which reduces costs when cleaned once per week for more uptime.
Attachments to Fit Your Needs
- Improve the performance and efficiency of your machine with the push block option.
- Ripper and scarifier options are available to assist with grading hard ground.
- Add the front blade option to spread more material faster.
- The optional tow hitch allows you to tow equipment or implements behind the machine.
Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
CAB
- Standard Seat
- Steering Wheel/Lever Controls
- Information Display Screen
- Product Link
-
ENGINE
- Cat C4.4
- ECO mode
- On-Demand fan
-
DRAWBAR CIRCLE MOLDBOARD
- Standard
-
SAFETY
- Parking brake
- Signaling/warning horn
- Rearview mirror
- Hydraulic brakes
- Side view mirrors
- Walkways and Grab Rails
Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
CAB
- Mechanical Suspension Seat
- Air Suspension Seat
- ROPS/FOPS
- Heating/Cooling Cab System
- Rear Wiper
- Base Cab
- Canopy
- Cab Plus
- Low profile cab
- Halogen Lighting
- Entertainment Radio Ready
- Rear Window Screen
- Front Wipers
- Digital Blade Slope Meter
-
ENGINE
- Reversing fan
-
DRAWBAR CIRCLE MOLDBOARD
- Circle Drive Slip Clutch
- Circle Saver
-
SAFETY
- Rearview camera
- Secondary steering system
-
ATTACHMENTS
- Push block
- Ripper
- Scarifier
- Front Blade
- Tow hitch
