826

826

Cat Landfill Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently and safely. Introduced in 1978, the 826 has been an industry leader for over 45 years. Focused on helping our customers succeed, we have continued to build upon each new series. The 826 continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.

Gross Power - SAE J1995:2014 324 kW
Net Power - SAE J1349:2011 302 kW
Net Power – ISO 9249:2007 302 kW

Technicial Specifications

Engine
Gross Power - SAE J1995:2014 324 kW
Net Power - SAE J1349:2011 302 kW
Net Power – ISO 9249:2007 302 kW
Engine Power - ISO 14396:2002 318 kW
Engine Model C15 Cat®
Emissions U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed 1800
Torque Rise 33%
Bore 137.2 mm
Stroke 171.4 mm
Displacement 15.2 l
High Idle Speed 2300 r/min
Low Idle Speed 800 r/min
Maximum Altitude – Without Derating (Tier 4 Final/Stage V) 2834 m
Maximum Altitude - Without Derating (Tier 3/Stage IIIA) 2773 m
Note Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
Operating Weight (Tier 4 Final/Stage V) 40917 kg
Operating Weight (Tier 3/Stage IIIA equivalent) 40454 kg
Maximum Operating Weight (Tier 4 Final/Stage V) 41988 kg
Maximum Operating Weight (Tier 3/Stage IIIA equivalent) 41526 kg
Transmission
Transmission Type Planetary - Powershift - ECPC
Direct Drive - Forward 1 6.8 km/h
Direct Drive - Forward 2 12.1 km/h
Direct Drive - Reverse 1 7.8 km/h
Direct Drive - Reverse 2 13.8 km/h
Hydraulic System
Pump Flow at 1800 rpm 117 l/min
Main Relief Pressure 26000 kPa
Maximum Supply Pressure 24100 kPa
Lift System Double Acting Cylinder
Bore 120 mm
Stroke 1070 mm
Service Refill Capacities
Cooling System 116 l
Engine Crankcase 34 l
Transmission 66 l
Fuel Tank 782 l
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V) 32 l
Differential - Final Drives - Front 100 l
Differential - Final Drives - Rear 110 l
Hydraulic Tank Only 134 l
Note All nonroad Tier 4 Final and Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications.– Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required.– Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Axles
Front Planetary - Fixed
Rear Planetary - Oscillating
Oscillation Angle ±5°
Braking System
Service Brakes Multi Disc Wet (Enclosed) 2 WHL
Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final/EU Stage V
Operator Sound Level (ISO 6396:2008) - Standard 73 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard 113 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression 72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression 110 dB(A)
Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2) The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Level (ISO 6396:2008) - Standard 73 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard 113 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression 72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression 110 dB(A)
Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2) The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Hydraulic System - Steering
Steering System - Circuit Pilot operated, load sensing
Bore 114.3 mm
Stroke 576 mm
Steering System - Pump Piston - Variable Displacement
Maximum System Flow 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited 24000 kPa
Vehicle Articulation Angle 86 °
Dimensions (Approximate)
Height to Top of Air Conditioning Condenser 4568 mm
Height - Cab Roof 4193 mm
Height - Top of Beacon 4765 mm
Height - Top of Exhaust Pipe 4439 mm
Height - Top of Hood 3312 mm
Ground Clearance - Bumper 960 mm
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard 2860 mm
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard 3096 mm
Hitch to Centerline of Front Axle 1850 mm
Wheel Base 3700 mm
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard 8715 mm
Ground Clearance 642 mm
Width - Over Wheels 3800 mm
Turning Radius - Inside of Wheels 2797 mm
Straight Blade
Width – Moldboard Length 4311 mm
Width - Over End Bits 4502 mm
Height with Cutting Edge and Screen 1900 mm
Maximum Depth of Cut 461 mm
Maximum Lift above Ground 1277 mm
Capacity, Rated 12.3 m³
Overall Machine Length (includes rear radiator guard, measured to cutting edge) 8715 mm
Semi U-Blade
Width – Moldboard Length 4462 mm
Width - Over End Bits 4522 mm
Height with Cutting Edge and Screen 2022 mm
Maximum Depth of Cut 619 mm
Maximum Lift above Ground 1165 mm
Capacity, Rated 16 m³
Overall Machine Length (includes rear radiator guard, measured to cutting edge) 9005 mm
U-Blade
Width – Moldboard Length 4331 mm
Width - Over End Bits 4398 mm
Height with Cutting Edge and Screen 2019 mm
Maximum Depth of Cut 619 mm
Maximum Lift above Ground 1156 mm
Capacity, Rated 17.5 m³
Overall Machine Length (includes rear radiator guard, measured to cutting edge) 9357 mm
Wheels
Combination Tips (Weight Group) 9582 kg
Plus Tips - Weight (Group) 9980 kg
Paddle Tips - Weight (Group) 9317 kg
Diamond Tips Weight (Group) 10885 kg
Outside Diameter 1971 mm
Outside Diameter - Diamond 1983 mm
Drum Diameter 1610 mm
Drum Width 1200 mm
Feet Per Row 6
Feet Per Wheel 30
Replaceable Weld On
Width Over Drums 149.6 in
Tip Height 7 in
Tip Height - Diamond 179 mm

Advantages and Features

OPERATOR COMFORT AND CONTROL

        
  • Flip-up armrest for easy ingress/egress.
    •     
  • Keep your operators informed about machine conditions and operation with Vital Information Management System (VIMS™) 3G machine monitoring system.
    •     
  • Enhanced visibility with standard rearview camera.
    •     
  • Preferred temperature settings maintained with automatic climate control.
    •     
  • Cat Premium Plus seat with standard features, including leather finish, forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening to provide total comfort throughout the workday.
    •     
  • Low spectator sound levels and optional low sound packages.

TOP-TIER SERVICE AND SUPPORT

        
  • Easy access in a controlled environment; electronics bay is located inside the cab.
    •     
  • Focused on safety with ground level or platform access to most major components.
    •     
  • Ground level: engine shutdown switch, lockable battery disconnect, and auxiliary start.
    •     
  • Quick visual inspection and minimized fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
    •     
  • Electronic air inlet restriction indicator.
    •     
  • Designed for ease of service and inspection.
        – Hydraulic oil cooler, fuel cooler, and roof-mounted condenser
        – Centralized grease points
    •     
  • Operators and technicians can resolve any problems before failure using VIMS.
    •     
  • Guarding around the axles mitigates risk of damaged components.

EFFICIENCY AND PRODUCTIVITY

        
  • Improved performance, long life, low emissions.
    •     
  • High productivity and fuel efficient.
    •     
  • Two engine options available that meet U.S. EPA Tier 4 Final and  EU Stage V emission standards or emitting equivalent to U.S.  EPA Tier 3 and EU Stage IIIA.
    •     
  • For the Tier 4 Final, EU Stage V option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing selective catalytic reduction (SCR) technology.
    •     
  • Regeneration is completely automatic and does not interrupt the machine’s work cycle.
    •     
  • Experience maximum responsiveness and control with Steering and Transmission Integrated Control (STIC™) system.
    •     
  • Conserve more fuel with the automatic engine and electrical system shutdown.
    •     
  • Achieve greater momentum on grades and fuel savings by carrying that momentum through the shift points advanced productivity electronic control system (APECS) transmission controls.
    •     
  • Operators experience less fatigue with throttle lock to maintain engine speed.
    •     
  • Equipped with Cat torque converter with lock-up clutch which eliminates torque converter (TC) losses while lowering system heat and transfers more power to the ground.
    •     
  • Torque converter with lock-up clutch eliminates torque converter losses while lowering system heat. Improves travel speeds and increases fuel efficiency.
    •     
  • Lock-up torque converter transfers more power to the ground and optimizes fuel efficiency in all applications.

PRODUCTIVITY WITH TECHNOLOGY

        
  • Compact technology combines advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes – saving on fuel and the cost of unnecessary rework.
    •     
  • Link technology (standard) provides access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes through the online VisionLink® interface.
    •     
  • Improved productivity with optional Cat Compact with Elevation Mapping.

LONG TERM VALUE AND DURABILITY

Working in the toughest application, the purpose-built 826 Landfill Compactor has specialized waste guarding to protect key components and systems from damage, debris, chemicals, premature wear, or wrapping of the material around components. This additional guarding includes:

        
  • Engine and Powertrain Guards – Hydraulically actuated guards help prevent trash buildup and shield components.
    •     
  • Front Frame Guards – Front frame guards prevent trash buildup inside the frame. This guard further protects components and hydraulic lines.
    •     
  • Axle Wrapping and Seal Guarding – The guarding prevents material from wrapping and binding around the axles, as well as assists in ease of cleaning.
    •     
  • Major System Guarding and Sight Gauges – Transmission oil tube is guarded to resist damage from debris. The sight gauge for the transmission is visible from ground level. The fuel tank is positioned away from the debris in the front frame and is easily accessed.
    •     
  • Air Inlet Screen – The vertically corrugated, fine-mesh air inlet screen helps reduce trash from entering the radiator area and allows for debris to fall off.
    •     
  • Striker Bars and Optional Cleaner Fingers – Striker bars are located in front of and behind the rear wheels and behind the front wheels. Striker bars help to keep wheels free of debris to assist the wheel step tips in maintaining good compaction. In cohesive material or severe packing conditions, optional cleaner fingers are available to further assist in keeping the wheel step tips clean.
    •     
  • Extended Roof – An oversized roof extends past the cab doors and windows to minimize debris buildup.
    •     
  • Under Hood Ventilation System – Creates a neutral pressure environment to prevent trash ingestion from hood openings while providing fresh air to the alternator, electronics, and turbo.

WHEEL TIPS BUILT TO PERFORM

        
  • Designed specifically to complement Cat machines.
    •     
  • Improves machine performance through longer wear life and maintaining traction.
    •     
  • Four wheel and tip configurations are available to meet your particular application:
        
  1. Paddle Tip – High performance and less fuel burn with more traction and less weight.
    2.     
  2. Plus Tip – Traditional design for increased side slope stability.
    3.     
  3. Combination Tip – Both paddle and plus tips provide the best compromise of performance and fuel economy with side slope stability.
    4.     
  4. Diamond Tip – Longest life tip on the market with reputation of reliability that is world class in the waste tip industry.

Standard Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • POWER TRAIN
    • Single Clutch Speed Shifting (SCSS)
    • Electronic Clutch Pressure Control (ECPC)
    • Air to air aftercooler
    • Brakes, full hydraulic, enclosed, wet multiple disc service brakes
    • Cat clean emission module (U.S. EPA Tier 4 Final/ EU Stage V only)
    • Muffler (under hood) (U.S. EPA Tier 3/EU Stage IIIA equivalent)
    • Electro-hydraulic parking brake
    • Engine, Cat C15 configured for two emissions options: Tier 4 Final/Stage V, or emitting equivalent to Tier 3/Stage IIIA
    • Fuel priming pump (electric)
    • Fuel to air cooler
    • Ground level engine shutoff
    • Heat shield, turbo and exhaust manifold
    • Hydraulically driven demand fan
    • Integrated braking system
    • Radiator, Aluminum Modular (AMR)
    • Separated cooling system
    • Starting aid (ether)
    • Throttle lock
    • Torque converter with Lock Up Clutch (LUC)
    • Eco Mode
    • Transmission, planetary, with 2F/2R speed range control
    • Under hood ventilation system
  • ELECTRICAL
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance-free (4 - 1,000 CCA)
    • Electrical system, 24V
    • Light, warning unswitched (LED strobe)
    • Lighting system, halogen (front and rear)
    • Lighting, access stairway
    • Lighting, underhood
    • Starter, electric (heavy duty)
    • Ground level lockable master disconnect switch
    • Auxiliary start receptacle
  • OPERATOR ENVIRONMENT
    • Camera, rear vision
    • Air conditioner with roof mounted condenser
    • Cab, sound-suppressed pressurized
    • Internal four-post rollover protective structure (ROPS/FOPS)
    • Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
    • 12V power port for mobile phone or laptop connection
    • Radio, CB ready
    • Coat and hard hat hooks
    • Finger tip shifting controls
    • Flip-up armrest
    • Heater and defroster
    • Implement hydraulic lockout
    • Glass (window) - rubber mounted glass
    • Light, (dome) cab
    • Lunch box and beverage holders
    • Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage V) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
    • Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
    • Mirror, internal (panoramic)
    • Mirrors, heated, rearview (externally mounted)
    • Premium plus seat containing forced air heating and cooling, 2-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness adjustment, dynamic end dampening, and leather finish
    • Seat belt with minder, retractable, 76 mm (3 in) wide
    • STIC control system with lockout
    • Sun visor, front
    • Tinted glass
    • Transmission gear (indicator)
    • Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles
    • Wet-arm wipers/washers (front and rear)
    • Intermittent wipers (front and rear)
    • Precleaner, cab powered
    • Horn group (trumpet)
  • GUARDS
    • Guards, axle (front and rear)
    • Guard, cab window
    • Guard, driveshaft
    • Guards, crankcase and power train, hydraulically powered
    • Guard, differential (front and rear)
  • FLUIDS
    • Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
  • OTHER STANDARD EQUIPMENT
    • Demand fan/swing out (hydraulic reversible)
    • Doors, service access (locking)
    • Ecology drains for engine, radiator, transmission, hydraulic tank
    • Emergency platform egress
    • Engine, crankcase, 500 hour interval with CJ-4 oil
    • Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
    • Fire suppression ready
    • Fuel tank, 782 L (207 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT
    • Hydraulic, engine, and transmission oil coolers
    • Total hydraulic filtration system
    • Oil sampling valves
    • Oil change system, high speed
    • Steering, load sensing
    • Stairway, left and right rear access
    • Vandalism protection caplocks
    • Venturi stack
    • Fold down exhaust stack for shipping
  • TECHNOLOGY PRODUCTS
    • Product Link™ – Cellular, Satellite
  • SPECIAL ARRANGEMENTS
    • Engine: – Sound suppression
    • Engine precleaners - single stage
  • BLADES
    • Dozer arrangement (no blade)
  • WHEELS AND CLEANER BARS
    • Striker bars
    • Wheels and tips: wheel arrangements – 7" combination tips

Optional Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • OPERATOR ENVIRONMENT
    • Radio, AM/FM/Aux/USB/Bluetooth®
    • Cat Compact SBAS Mapping (available through SITECH only)
    • Cat Compact RTK Mapping (available through SITECH only)
  • GUARDS
    • Guard – rear fan and grill
  • POWER TRAIN
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
  • SPECIAL ARRANGEMENTS
    • Engine precleaners – dual stage
  • MISCELLANEOUS
    • CE/UKCA Certification (standard where regulations require it)
    • Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)
  • WHEELS AND CLEANER BARS
    • Striker bars with cleaner fingers
  • OTHER STANDARD EQUIPMENT
    • Stairway, swingout (LH & RH)