Technicial Specifications
| Pull-Down Capacity | Up to 39 009 kg (86,000 lb) |
| Hole Diameter | 229-311 mm (9-12.25 in) |
| Engine | Cat® C32B |
| Bit Load | Up to 42 149 kg (Up to 92,922 lb) |
| Body Length - Standard Cab | 13.27 m |
| Length - Mast Down - Extended Cab | 25.43 m |
| Length - Mast Down - Standard Cab | 24.9 m |
| Width - Front | 5.39 m |
| Body Length - Extended Cab | 13.79 m |
| Height - Mast Up | 23.77 m |
| Width - Rear | 6.32 m |
| 13.7 m (44.9 ft) Mast - Hoist Speed | 37.4 m/min |
| 17.5 m (57.4 ft) Mast - Hoist Speed | 37.4 m/min |
| Emissions (Equivalent to Tier 2): Engine | C32B @ 1,800 rpm |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth | Down to 74.6 m (Down to 244.9 ft) |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth | Down to 47.9 m (Down to 157.4 ft) |
| 17.5 m (57.4 ft) Mast - Pulldown Capacity | Up to 39 009 kg (Up to 86,000 lb) |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth | 17.5 m |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range | 203-311 mm (8-12.25 in) |
| Angle Drilling | Vertical to 30° (in 5° increments) |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range | 203-311 mm (8-12.25 in) |
| 17.5 m (57.4 ft) Mast - Bit Load - Single Pass | Up to 42 149 kg (Up to 92,922 lb) |
| 13.7 m (44.9 ft) Mast - Hoist Capacity | Up to 22 113 kg (Up to 48,750 lb) |
| Compressor - Rotary Drilling (1) | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) |
| Compressor - Rotary Drilling (2) | 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) |
| 13.7 m (44.9 ft) Mast - Pulldown Capacity | Up to 39 009 kg (Up to 86,000 lb) |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth | 13.7 m |
| Emissions (U.S. EPA Tier 4 Final): Engine | C32B @ 1,800 rpm |
| Compressor - DTH Drilling | 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) |
| 17.5 m (57.4 ft) Mast - Hoist Capacity | Up to 22 113 kg (Up to 48,750 lb) |
| 13.7 m (44.9 ft) Mast - Bit Load - Single Pass | Up to 41 165 kg (Up to 90,753 lb) |
| Emissions (U.S. EPA Tier 4 Final): Power Rating ISO 14396 | 751 kW |
| Emissions (Equivalent to Tier 2): Power Rating ISO 14396 | 769 kW |
| Drawbar Pull | 547000 N |
| Track chain guards and guides | Level two |
| Travel Speed | 2.45 km/h |
| Lower rollers | Fourteen (14) |
| Model | Cat® 349E EL Excavator type |
| Carrier Rollers | Three (3) |
| Triple grousers for soft rock ground bearing pressure 1.28 bar (18.5 psi) | 750 mm |
| Components (10) | In-deck mounted battery box |
| Components (9) | Self-closing, gates secure egress ladder locations |
| Components (12) | Air hose retention devices |
| Components (2) | Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left |
| Components (6) | Guards for exhaust pipes and turbo lines |
| Feature | Approach angle of 14 degrees facilitates loading and unloading on a lowboy |
| Components (7) | Mast access ladder with mast grating (option) |
| Components (4) | Tram alarm is automatic and audible |
| Components (11) | Ground level keyed battery disconnect/starter lockout with remote jump start terminals |
| Components (1) | Alloy drill deck covers, with storage provision |
| Components (5) | Hinged protective guard for full front drill window |
| Components (3) | Electric horn activated by push button in the cab |
| Components (8) | Three egress points on deck areas in addition to main access |
| Components (10) | Filter indicators for hydraulic, compressor and engine |
| Components (14) | ECM controlled proportional fan speed control system |
| Components (23) | Data logging of machine health with warnings, and fault code records; export capability |
| Components (20) | Cabin pressure manometer with indicator (option) |
| Components (3) | Rotation torque control |
| Components (12) | Dust suppression control |
| Components (17) | Tram interlock, mast up and locked or down and parked |
| Components (1) | All electric controls for drilling, tramming, leveling plus auxiliary functions |
| Components (22) | Prewired for Terrain and autonomous operation |
| Components (8) | Delayed engine shut down |
| Components (19) | Cab environment controls (AC, filter, heat, fan speeds) |
| Components (7) | Drill performance and display system |
| Components (13) | Mast lock indicator |
| Components (6) | Drill depth meter |
| Components (2) | Electronic compressor control |
| Components (4) | Virtual rotary head travel stops and interlocks |
| Components (11) | Jack pressure sensors in the display |
| Components (5) | Pipe positioner engaged/disengaged indicator |
| Components (18) | Tram interlock, jacks retracted |
| Components (16) | Tram interlock, pipe in hole |
| Components (21) | Dust curtain lifting system – auto hydraulic raise front and rear (option) |
| Components (15) | Tram interlock, machine stability limits |
| Components (9) | Rotary head rpm gauge – (digital display in screen) |
| Body Length - Standard Cab | 13.27 m |
| Body Length - Extended Cab | 13.79 m |
| Width - Rear | 6.32 m |
| Length - Mast Down - Standard Cab | 21.1 m |
| Length - Mast Down - Extended Cab | 21.62 m |
| Height - Mast Up | 19.93 m |
| Width - Front | 5.39 m |
| Note (2) | Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling |
| Features (12) | Pipe catcher; manual or optional hydraulically actuated |
| Features (4) | Feed system accommodates multiple pipe diameters |
| Note (1) | Hydraulic, indexing pipe carousels accept various pipe diameters |
| Features (13) | Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only) |
| Features (2) | Pulldown/hoist system is a single cylinder |
| Features (1) | 13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel |
| Features (9) | Drill pipe positioner |
| Features (10) | Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option) |
| Features (3) | Auto tensioning of pull down and hoist cables |
| Features (6) | Sliding deck wrench assembly |
| Features (11) | Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb) |
| Features (15) | Mast access ladder and grating (option) |
| Features (5) | Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters |
| Features (7) | Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH |
| Features (14) | Mast lanyard mounting provisions (option) |
| Features (8) | Angle drilling 0-30°; in 5° increments |
| Components (4) | Ether starting aid; ether bottle supplied locally |
| Components (2) | Scheduled oil sampling (S∙O∙SSM) ports |
| Components (1) | Dual starter motors |
| Components (3) | Common air intake filters provide +500 hour service interval in normal operating conditions |
| Package (1) | Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water |
| Package (2) | Standard – Fast Fill for fuel and water; Automatic Lubrication System |
| Package (3) | Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose |
| Water injection and dry dust collector (option) | – Water tank capacity 1514 L (400 gal)<br>– 204 m³/min (7,200 cfm) dry dust collector<br>– Self-cleaning filters, with auto-eject dust chute |
| Water Injection - Standard | – Water tank capacity 1514 L (400 gal) |
| Choices (1) | Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector) |
| Choices (3) | Static dust curtains, four sides boxed in (standard) |
| High Volume Water Injection System - Not Compatible with Basic Service Package | – Water tanks total capacity 3785 L (1,000 gal) maximum<br>– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)<br>– Secondary tank above deck – 2271 L (600 gal) capacity deck |
| Choices (2) | Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications) |
| Components (4) | Top Sub, or Shock sub and cross over adapter (option) |
| Components (3) | Deck wrench, sliding |
| Components (5) | Bit sub |
| Components (1) | Roller deck bushing |
| Components (6) | Pipe wiper seal |
| Components (2) | Pipe positioner inserts |
| Rotary Drilling (2) | 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) |
| Receiver Tank Choice (1) | Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE |
| Rotary Drilling (1) | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) |
| DTH Drilling - Includes Tool Lubrication and Hammer Storage | 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) |
| Note | With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption<br>– Both high and low pressure compressors contain this feature |
| Receiver Tank Choice (2) | High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE |
| Choice | Electronic compressor control and regulation with purged air lines |
| Components (5) | Four (4) lift lugs, for use with cables or chains |
| Components (7) | Bit storage box in-deck with hinged cover (option) |
| Components (6) | Walkway around cab to drill deck (option) |
| Features (2) | Slip resistant surface |
| Features (3) | Fuel tank capacity 1609 L (425 gal) |
| Components (1) | Stationary rear deck; for vertical and angle drilling |
| Components (2) | Four leveling jacks to provide leveling on a 7° bench (any orientation) |
| Features (6) | Three egress points on deck areas in addition to main access |
| Components (10) | Drill pipe thread greaser with remote fill tank or disposable grease bucket (option) |
| Features (7) | Sturdy guardrails, toe guards, self closing gates |
| Components (4) | Heavy duty tow hooks (front end) |
| Components (3) | Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option) |
| Components (8) | DTH hammer storage on drill deck with high pressure configuration (option) |
| Features (4) | Fuel capacity expansion for additional +1609 L (425 gal) |
| Features (5) | Bolt-on platform for cold weather generator or fire suppression bottles (option) |
| Components (9) | Hydraulically operated viewing hatch in drill deck with spotlight (option) |
| Features (1) | Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life |
| Components (2) | Separate engine cooling module |
| Components (1) | Coolers with easy cleaning access |
| Components (3) | Replaceable cooler core sections |
| Components (4) | Automatic variable speed fan control |
| Features | Functional in ambient temperature of 52° C (125° F) |
| Components (6) | Wiring for third party interface |
| Components (3) | Drill assist (single or multipass auto drill) (options) |
| Components (5) | Optional Command for Drilling enables each operator to manage more than one machine |
| Type | Autonomy ready |
| Components (2) | Auto level, auto retract, auto mast |
| Components (1) | Drill depth indicator and interlocks |
| Optional Cat Terrain for Drills - Mining System Interface | – Production<br>– Navigation |
| Components (4) | Product Link Elite (hardware from factory, subscription package via dealer) |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (1) | 203 mm |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: DTH | 178 mm |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary or DTH | 194 mm |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (2) | 219 mm |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary | 235 mm |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (2) | 219 mm |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (1) | 203 mm |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: DTH | 178 mm |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary or DTH | 194 mm |
| Note | Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)<ul><li>Dual purpose pipe carousel accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters</li></ul> |
| Climate Level 2 Arctic Fluids and Lubricants | Rated down to –18° C (–0.4° F) temperatures |
| Climate Level 1 Standard Fluids and Lubricants (1) | Rated down to –1° C (30° F) temperatures |
| Climate Level 1 Standard Fluids and Lubricants (2) | Withstands high heat to 52° C (125° F) |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (6) | Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (3) | Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (1) | Rated down to –40° C (–40° F) temperatures |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (5) | Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (2) | Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (4) | Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plus tank |
| Cable Diameter | 13 mm |
| Winch Reach - Past The Drill Deck | 6.1 m |
| Capacity Rating | 1814 kg |
| Note | Variable speed control |
| Lighting | – LED interior lights; separate reading light, and backlit joysticks and keypads<br>– Zone controls for area lights and spot lighting for night drilling<br>– Flood lights for the drill perimeter<br>– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways<br>– Standard lighting is Halogen, 1,300 lumens flood light on perimeter, area spot lights have 1,950 lumens<br>– Premium lighting is LED, 4,200 lumens flood light on perimeter (option)<br>– Mast clearance lights, cab mounted strobe, front mounted tram beacon (option) |
| Components (7) | Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port |
| Components (4) | Drill performance touchscreen display |
| Components (3) | Cab perimeter walkway available for both cab sizes |
| Components (1) | Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station |
| Components (13) | Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in) |
| Components (9) | Power convertor 24V to 12V |
| Components (2) | Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave |
| HVAC | – Floor vents in the foot rest area<br>– Roof-mounted air conditioner/heating/pressurizing unit<br>– Filter access from deck, does not require roof access, and has approximately 500 hour service interval<br>– Defogging HVAC vents on driller window |
| Components (6) | Two swing-out hinged doors with windows and Cat keyed locks |
| Components (14) | Trainer’s seat that folds away and has retractable seat belt (optional) |
| Cameras | – Mounted on the front and left sides to provide 360° view from operator's seat<br>– Camera on the mast to view pipe carousel/top drive operation |
| Components (5) | Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise |
| Components (10) | Radio-ready for communication and entertainment radio |
| Cab - Premium | – Leather seat with heat and ventilation<br>– Dual pane window glass<br>– Front window guard<br>– Additional in-cab storage box<br>– Additional windshield wipers on front and rear windows<br>– Window shades (option)<br>– Foldaway trainer’s seat (option)<br>– Removable floor mat |
| Components (11) | Cab roof access ladder (option) |
| Cab - Standard | – Fabric seat<br>– Single pane window glass<br>– Windshield wiper for driller window<br>– Window shades (option)<br>– Foldaway trainer’s seat (option)<br>– Removable floor mat |
| Components (8) | Additional display screen for cc cameras; color, high-definition 254 mm (10 in) |
| Components (12) | Literature holder |
| Components (4) | Virtual rotary head travel stops and interlocks |
| Components (3) | Rotary torque control |
| Components (2) | Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque |
| Components (1) | Spindle with 168 mm (6.625 in) API regular thread and splined collar |
| Components (2) | One (1) auxiliary circuit pump – 110 cc (piston, load sensing) |
| Components (3) | Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls) |
| Components (1) | Two (2) primary pumps – 210 cc (piston, with proportional electronic controls) |
| Components (4) | Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement) |
| Components (5) | Scheduled Oil Sampling (S∙O∙S) ports |
| Components (1) | Two piece bushing |
| Components (6) | Pipe wiper seal |
| Components (4) | Shock sub and top sub adapter |
| Components (5) | Cross over hammer adapter |
| Components (3) | Deck wrench, sliding |
| Components (2) | Pipe positioner inserts |
| Choice (1) | Fixed access ladder to the cab area |
| Choice (2) | Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down |
| Choice (3) | Cab perimeter walkway available with either choice |
| Mast Accessories Hydraulic (2) | One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket |
| Mast Accessories Hydraulic (1) | One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket |
| Angle Drilling | Included with either mast |
| Mast Accessories Manual, 17.5 m (57.4 ft) Mast | Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket |
| Mast Accessories Manual, 13.7 m (44.9 ft) Mast | One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket |
| 13.7 m (44.9 ft) Mast Carousel; holds quantity of 4 × 12.19 m (40 ft) pipes; total depth 62.5 m (204.9 ft): Pipe diameters | 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) |
| 13.7 m (44.9 ft) Mast Carousel; holds quantity of 5 × 12.19 m (40 ft) pipes; total depth 74.6 m (244.9 ft): Pipe diameters | 194 mm (7.625 in), 219 mm (8.625 in) |
| 17.5 m (57.4 ft) Mast Carousel; holds quantity of 2 × 7.62 m (25 ft) pipes; total depth 32.7 m (107.4 ft): Pipe diameter | 235 mm |
| 17.5 m (57.4 ft) Mast Carousel; holds quantity of 4 × 7.62 m (25 ft) pipes; total depth 48 m (157.5 ft): Pipe diameters | 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) |
| Note | 13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)<ul><li>Accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters</li></ul> |
| Option | Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter |
| Lifting Bails (Available on Request) | – 114 mm (4.5 in) API reg thread<br>– 140 mm (5.5 in) API reg thread<br>– 168 mm (6.625 in) for top sub/shock sub API thread<br>– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread<br>– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread |
| Working Weight Range - Minimum/Maximum | 75 800/97 000 kg (167,110/213,848 lb) |
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (2) | 235 mm (9.25 in) |
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (1) | 178-219 mm (7.0-8.625 in) |
| Working Weight Range - Minimum/Maximum | 75 500/97 500 kg (166,449/214,950 lb) |
Advantages and Features
WORLD-CLASS OPERATOR STATION
- Ergonomic controls to help operators stay alert and avoid fatigue
- Multifunction joystick controls and touchscreen monitors are easy to use and intuitive
- Excellent visibility, thanks to multiple cameras and full-length windows
- Optional heated and ventilated seat for enhanced operator comfort
100% CAT INTEGRATION
- Cat to the core, with common parts and components and consistent design characteristics across all Cat drill models
- Shared software for autonomous features
- Backed by the world-class support of the Cat dealer network
CAT ELECTRONICS: BACKBONE OF THE MACHINE
- Common electronic architecture across all Cat machines to ensure technician familiarity
- Cat Electronic Technician (Cat ET) enables fast and easy troubleshooting
- Serves as common platform for integrating future autonomy solutions
- Product Link™ Elite provides real-time performance tracking
MATCHED POWERTRAIN
- Variable air volume for reduced fuel consumption and powerful performance
- C32B engine matched to largest “standard” compressor in this class for fast cycle times
- Powertrain optimized to withstand rigorous drilling applications
- High- and low-pressure configurations offer variable volume air control
- Optimal feed force, rotary torque and air, helping to reduce fuel consumption
TECHNOLOGY AND AUTOMATION
- Integrated Drill Assist functionality, including auto level, auto retract jacks, auto raise and lower mast, and auto drill
- Machine health and performance monitoring keep machine running productively
- Drill depth meter helps reduce over- and under-drilling
- Ready to connect with the Cat MineStar™ suite of technologies, including Terrain for drilling and Command for drilling
SAFETY
- Three standard cameras and large windows give the operator excellent visibility
- MineStar Command for drilling enables remote or autonomous operation — removing operator from the machine
- Seven engine shut-down buttons
- Slip-resistant surfaces for safer ingress/egress and service
- LED interior lights and backlit joysticks and keypads; exterior spot and flood lights illuminate paths for ingress/egress
SUSTAINABILITY
- Designed to use less fuel, which reduces engine emissions
- Tier 4 Final engines reduce NOx and particulate matter
- Reduced waste and lower owning and operating costs thanks to increased commonality of systems and components, plus a reduction in unique part numbers
- Longer maintenance intervals that decrease the amount of waste contributed to the environment
Optional Equipment
-
FRAME
- Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (option) required for autonomy packages
-
MAST
- Overhead winch with remote; variable speed drive with ≥ 1814 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
- Rotary tool lubrication, 113.5 L (30 gal) oil injection system
- Mast access ladder, mast grating and lanyard posts
-
OPERATOR ENVIRONMENT
- Trainer seat that folds away
- Window shades
- Cabin pressure manometer gauge
- Cab roof access ladder
-
SERVICE TOOL OPTIONS
- Bushing Retention Tool 178 to 235 mm (7 to 9.250 in) pipe diameter
-
Lifting bails (available on request; required for commissioning)
– 114 mm (4.5 in) API reg thread
– 140 mm (5.5 in) API reg thread
– 168 mm (6.625 in) for top sub/shock sub API reg thread
– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread
– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread
-
TECHNOLOGY PRODUCTS
- Product Link Elite – cellular
- Product Link Elite – Dual (cellular and satellite)
- Terrain for Drilling
-
GROUND ENGAGING TOOLS
-
Drill bits, rotary tricone
– 228 mm (9.0 in), OPT 1, (S3)
– 228 mm (9.0 in), OPT 2, (M2)
– 228 mm (9.0 in), OPT 3, (H1)
– 251 mm (9.875 in), OPT 1, (M1)
– 251 mm (9.875 in), OPT 2, (M3)
– 251 mm (9.875 in), OPT 3, (H1)
– 270 mm (10.625 in), OPT 1, (S3)
– 270 mm (10.625 in), OPT 2, (M3)
– 270 mm (10.625 in), OPT 3, (H1)
– 311 mm (12.25 in), OPT 1, (M1)
– 311 mm (12.25 in), OPT 2, (M3)
– 311 mm (12.25 in), OPT 3, (H1)
-
Drill bits, rotary tricone
-
DUST SUPPRESSION
- Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
- Tram off spray system
-
DRILL PIPE
-
12.19 m (40 ft) Pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of four
– DTH – 178 mm (7 in)
– Rotary/DTH – 194 mm (7.625 in)
– Rotary – 203 mm (8 in)
– Rotary – 219 mm (8.625 in)
-
7.62 m (25 ft) Pipes, 17.5 m (57.4 ft) Mast – Carousel holds quantity of four
– DTH – 178 mm (7 in)
– Rotary/DTH – 194 mm (7.625 in)
– Rotary – 203 mm (8 in)
– Rotary – 219 mm (8.625 in)
– Rotary – 235 mm (9.25 in) Carousel accepts quantity of two
-
9.14 m (30 ft) pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of two with special sub adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
– Accepts 194 mm (7.625 in) pipe
- Contact factory for additional pipe diameters
-
12.19 m (40 ft) Pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of four
